This eGPU case was used in my shop to display a gpu with a laptop. It is in original box with all accessories. Dock-OC4+ACB1
JMT M.2 M-Key to PCIE 4.0X4 External Graphics Card Stand Bracket Compatible with Oculink / M.2 NVMe Laptop eGPU GDP Handhelds Product Description: 1, O culink adapter board, support devices with O culink port to expand PCIE card. 2, Support M.2 port, through the standard O culink extension cable to PCIE card. 3, Support expanding GPU graphics card, PCIE network card, PCIE sound card, PCIE capture card, etc. PCIE array card only supports X4 devices. 4, The maximum bandwidth speed is PCIE 4.0 X4 GEN4, backward compatible with GEN3. 5, Support ATX\SFX\small 1U power supply, the adapter board only needs to be inserted into the 24P power supply, the graphics card power supply is provided by other power supplies. Power supply should be 500W and above. 6, Support synchronous start and stop following the host, does not support hot-swap. 7, Only GDP handhelds with o culink ports have been successfully tested for compatibility, other hosts with O culink ports are still being collected. 8, The successful compatibility rate is 90% for laptops with M.2 ports, 95% for small hosts with M.2 ports, and 95% for other hosts. 9, This series of kit products do not include O culink extension cable, need to purchase separately. 10, This series of boxes do not support built-in power supply, and limit the size of the graphics card.
I have also included an additional m.2 to oculink adapter with extension cable, allowing you to set it up with multiple platforms.
JMT M.2 NVMe M Key to Oculink 4i / SFF8612 Extension Cable PCIe4.0 X4 Gen3 4 Compatible with T10 / SAS-4 SFF-8612 M.2 M key nvme to Oculink Adapter Cable with Fixed Buckle. QA: 1. PCIe speed of this cable: This accessory is incompatible with third-party components. Gen4 performance is only guaranteed when paired with our DOCK-OC4/OC5/OC6 products. 2.Tested this device in my M.2 slot but received no signal: This product is an accessory only and cannot function independently. It requires pairing with a DOCK-OC4/OC5/OC6 graphics card dock. 3.Product received is defective: This product is solely an accessory. Its quality cannot be assessed when used alone; it must be paired with a graphics card dock to evaluate performance. 4.Product performance: This product is solely an accessory. Performance is determined by the primary device and graphics card dock; the quality of this accessory does not affect overall performance. Product Description : 1, OCuLink is the next generation of high-speed internal and external I/O connectors for servers, compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4. 2, M.2 to Ouclink 4i\SFF8611 silver-plated extension cable, support PCIE 4.0 X4 GEN4, GEN3. 3,Suitable for small hosts, desktops, laptops, etc. to convert M.2 sockets to Oculink sockets, with fixing holes for fixing. 4,Cable length is optional and can be customised. The length indicates the cable part, without connector. 5,Silver-plated cable, aluminium foil shielding, high speed and no loss. 6,Support PCIE 4.0 data transmission, support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0. 7,Support DOCK-OC4/DOCK-OC5/ DOCK-OC6 external docking station.
M.2 M-Key to PCIE 4.0X4 External Graphics Card Stand Bracket Oculink NVMe Laptop eGPU
This eGPU case was used in my shop to display a gpu with a laptop. It is in original box with all accessories. Dock-OC4+ACB1
JMT M.2 M-Key to PCIE 4.0X4 External Graphics Card Stand Bracket Compatible with Oculink / M.2 NVMe Laptop eGPU GDP Handhelds Product Description: 1, O culink adapter board, support devices with O culink port to expand PCIE card. 2, Support M.2 port, through the standard O culink extension cable to PCIE card. 3, Support expanding GPU graphics card, PCIE network card, PCIE sound card, PCIE capture card, etc. PCIE array card only supports X4 devices. 4, The maximum bandwidth speed is PCIE 4.0 X4 GEN4, backward compatible with GEN3. 5, Support ATX\SFX\small 1U power supply, the adapter board only needs to be inserted into the 24P power supply, the graphics card power supply is provided by other power supplies. Power supply should be 500W and above. 6, Support synchronous start and stop following the host, does not support hot-swap. 7, Only GDP handhelds with o culink ports have been successfully tested for compatibility, other hosts with O culink ports are still being collected. 8, The successful compatibility rate is 90% for laptops with M.2 ports, 95% for small hosts with M.2 ports, and 95% for other hosts. 9, This series of kit products do not include O culink extension cable, need to purchase separately. 10, This series of boxes do not support built-in power supply, and limit the size of the graphics card.
I have also included an additional m.2 to oculink adapter with extension cable, allowing you to set it up with multiple platforms.
JMT M.2 NVMe M Key to Oculink 4i / SFF8612 Extension Cable PCIe4.0 X4 Gen3 4 Compatible with T10 / SAS-4 SFF-8612 M.2 M key nvme to Oculink Adapter Cable with Fixed Buckle. QA: 1. PCIe speed of this cable: This accessory is incompatible with third-party components. Gen4 performance is only guaranteed when paired with our DOCK-OC4/OC5/OC6 products. 2.Tested this device in my M.2 slot but received no signal: This product is an accessory only and cannot function independently. It requires pairing with a DOCK-OC4/OC5/OC6 graphics card dock. 3.Product received is defective: This product is solely an accessory. Its quality cannot be assessed when used alone; it must be paired with a graphics card dock to evaluate performance. 4.Product performance: This product is solely an accessory. Performance is determined by the primary device and graphics card dock; the quality of this accessory does not affect overall performance. Product Description : 1, OCuLink is the next generation of high-speed internal and external I/O connectors for servers, compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4. 2, M.2 to Ouclink 4i\SFF8611 silver-plated extension cable, support PCIE 4.0 X4 GEN4, GEN3. 3,Suitable for small hosts, desktops, laptops, etc. to convert M.2 sockets to Oculink sockets, with fixing holes for fixing. 4,Cable length is optional and can be customised. The length indicates the cable part, without connector. 5,Silver-plated cable, aluminium foil shielding, high speed and no loss. 6,Support PCIE 4.0 data transmission, support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0. 7,Support DOCK-OC4/DOCK-OC5/ DOCK-OC6 external docking station.
