This is the Deepcool Matrexx 50 Mid-Tower Case with the addition of 4 PC Cooler HALO 120mm Fans. Three at the front of the case set to intake and one at the rear to exhaust.
The Deepcool Matrexx 50 Mid-Tower Case features a minimalistic design with plenty of space for high-end hardware. It supports ATX, E-ATX, Micro-ATX, Mini-ITX motherboards, two 3.5" drives, four 2.5" drives, and seven single-slot PCIe cards. Aesthetics-wise, it has 4mm tempered-glass front and side panels for a clear view of its interior and a PSU shroud to hide cables. There are also plenty of cooling options with fan mounting locations at the front, top, and rear. Dust filters are located at the front, top, and bottom. For more info about the case, you can go here:
The PC Cooler HALO 120mm Fans are LED RGB Silent Fans. There are four in the case, and they are all 120 mm in size. I specifically put the three-pack fans in the front and got the one-pack and put it in the back. Three for intake and one for exhaust. They are set to run at an RPM of 1000 - 2000, have an airflow of 72 CFM, are addressable RGB with a controller, have a noise level of 8 - 29.1 dB, and the fans support pulse width modulation (PWM.) For more info about the fans, you can go here:
NOTE: The case is missing two rear PCI-E slot covers in the back of the case, so keep that in mind.
All the IO and cables of the case were tested, and they all work fine.
Nothing that came with the case is missing. The mesh cover in the top and bottom are still there, and so are the case's front, left, and right side panels. The drive cage in the case is still present, and all the screws the case came with will all be included in the order. The manual is also included.
The fans will also have all the cables and screws included in the order and the manual for the fans.
Deepcool MATREXX 50 ATX Mid Tower Case + 4 PC Cooler HALO 120mm Fans
This is the Deepcool Matrexx 50 Mid-Tower Case with the addition of 4 PC Cooler HALO 120mm Fans. Three at the front of the case set to intake and one at the rear to exhaust.
The Deepcool Matrexx 50 Mid-Tower Case features a minimalistic design with plenty of space for high-end hardware. It supports ATX, E-ATX, Micro-ATX, Mini-ITX motherboards, two 3.5" drives, four 2.5" drives, and seven single-slot PCIe cards. Aesthetics-wise, it has 4mm tempered-glass front and side panels for a clear view of its interior and a PSU shroud to hide cables. There are also plenty of cooling options with fan mounting locations at the front, top, and rear. Dust filters are located at the front, top, and bottom. For more info about the case, you can go here:
The PC Cooler HALO 120mm Fans are LED RGB Silent Fans. There are four in the case, and they are all 120 mm in size. I specifically put the three-pack fans in the front and got the one-pack and put it in the back. Three for intake and one for exhaust. They are set to run at an RPM of 1000 - 2000, have an airflow of 72 CFM, are addressable RGB with a controller, have a noise level of 8 - 29.1 dB, and the fans support pulse width modulation (PWM.) For more info about the fans, you can go here:
NOTE: The case is missing two rear PCI-E slot covers in the back of the case, so keep that in mind.
All the IO and cables of the case were tested, and they all work fine.
Nothing that came with the case is missing. The mesh cover in the top and bottom are still there, and so are the case's front, left, and right side panels. The drive cage in the case is still present, and all the screws the case came with will all be included in the order. The manual is also included.
The fans will also have all the cables and screws included in the order and the manual for the fans.
