Brand new never-used stock AM4+ Ryzen CPU Cooler. No bells and whistles, this cooler will do one thing and do it well: keep your CPU from exploding.

Acquired as part of a full desktop build that ended up using liquid cooling instead; never used. Factory thermal paste is still intact!

Stock AM4+ Ryzen CPU Cooler

Pulled from a non working computer and its untested as is, no returns.

CPU Cooler for HP Z workstation/servers

100% Money back guarantee for any workmanship or parts failures. 

This Policy DOES NOT include regret returns. 

There are 3x of these avail.

2 of these are lightly used just to confirm the CPU was working and 1 is new in box. 

These will cool i3s and i5s well, I would not bother to get this for an i7 it'll be louder than you want. 


Specs per intel:

https://www.intel.com/content/www/us/en/support/articles/000089190/processors/intel-core-processors.html

Overall Height	Up to 47mm (top of fan to bottom of heatsink)

Overall Size	Up to 100mm x 100mm

Mass	Up to 350g

Sound Power Level	3.9 BA (2400 RPM, 40C inlet, 65W); 4.6 BA (max RPM)

Sound Pressure Level	29 dBA (2400 RPM, 40C inlet, 65W)

TDP Support	Up to 65W (12th Gen Intel® Core™ Desktop Processors)

Fan Type	PWM controlled variable speed fan

Connector Type	4-pin

Operating Voltage	13.2V max, 12.0V rated, 10.8V min

Current (peak)	Up to 400mA

Max RPM (+/- 5%)	Up to 3150 RPM

Min RPM (+/- 20%)	600 RPM

Operating Temp	0 to 70C

Operating Humidity	85% relative humidity @ 55C

Fan Protection	Locked-rotor/polarity protected

Sense Frequency	2 pulses/Rev, 12V pull-up with 10Kohm

PWM Frequency	25KHz +/- 5KHz

PWM Pull-up Voltage	5.25V max

PWM Duty Cycle Range	0–100%

LGA 1700 Intel® Laminar RM1 Cooler

Used, but fully functional intel stock cooler for older generation intel.

Intel Stock Cooler

These mounting brackets are compatible with the L9x65 low profile noctua cooler, they offset the cooler by about 7 degrees to cover the chiplet AM5 design. The offset proclaims a 1-3 degree Celsius cooling effect on AM5 chips.

NOCTUA NM-AMB12 AM5 Offset Mounting Bars.

This cooler supports nearly every CPU/Motherboard on the 115x socket platform. This includes, but is not limited to:
-1156 (1st Gen I series)
-1155 (2-3rd Gen I series)
-1150 (4th-5th Gen I series)
-1151 (6th-9th Gen I series)

If you are unsure if this cooler will support your system, feel free to send a message and ask! 

NOTE: You WILL need thermal paste to properly utilize this cooler. I am happy to link you to ones I recommend.

Stock AM4+ Ryzen CPU Cooler

Similar listings