Here lies a one of a kind Berserk themed PC built for fans and PC gaming enthusiasts. I designed and built this unique rig as a massive tribute to Kentaro Miura's masterpiece. The goal was to make a PC that actually feels like it belongs in the Berserk universe: dark, aggressive and intense. We custom made the vinyl work on the glass and the curated manga panels running on the screens, as every inch of this build planned out to honor the Black Swordsman. 𒉭

• ───────────────────────── •

𝑾𝒉𝒂𝒕 𝑾𝒆 𝑪𝒓𝒆𝒂𝒕𝒆𝒅:

The centerpiece of the build is the massive Hyte Y70 Infinite touch screen, which I’ve loaded up with custom-formatted manga panels. The 360mm AIO cooler screen is synced up with its own matching Berserk animations so the digital aesthetic flows perfectly across the whole rig. I also installed white AIO tube combs to keep the coolant lines perfectly parallel and added a sharp clean pop of contrast against the darker internal components.

For the exterior, I applied custom vinyl graphics directly to the glass. The main side panel features Guts in his Berserker armor wielding the Dragonslayer while the smaller angled glass sports the "Berserk" title in Japanese with tiny subtle blood splatters. Sitting right behind that smaller glass panel is an authentic Berserker Guts Pop Up Parade L-size figure. To tie the physical mods together, I included a 3D printed custom red Brand of Sacrifice and mounted it inside the chassis.

This thing is an absolute monster built for high end 1440p and 4K gaming. The cable management is meticulously clean, front and back, and an RGB strimer cable runs to the GPU to keep the lighting aggressive but clean. I’ve already updated the BIOS set the RAM to its proper EXPO speeds and stress tested the entire system. It’s fully tuned and completely plug and play the moment you unbox it.

• ───────────────────────── •

𝑻𝒉𝒆 𝑺𝒑𝒆𝒄𝒔:

𝗖𝗣𝗨: AMD Ryzen 7 9800X3D

𝗚𝗣𝗨: AMD Radeon RX 9070 XT 16GB GDDR6 (Sapphire Pulse)

𝗠𝗼𝘁𝗵𝗲𝗿𝗯𝗼𝗮𝗿𝗱: ASUS Prime B850-PLUS WiFi

𝗥𝗔𝗠: 32GB DDR5-6000 (EXPO enabled)

𝗦𝘁𝗼𝗿𝗮𝗴𝗲: 2TB NVMe PCIe 4.0 SSD

𝗖𝗼𝗼𝗹𝗲𝗿: 360mm LCD AIO Cooler setup in a Push/Pull configuration (6 RGB fans total)

𝗣𝗼𝘄𝗲𝗿 𝗦𝘂𝗽𝗽𝗹𝘆: 1000W 80+ Gold

𝗖𝗮𝘀𝗲: Hyte Y70 Infinite Touch (Black)

𝗙𝗮𝗻𝘀: 5 additional RGB case fans (11 fans total in the system)

𝗘𝘅𝘁𝗿𝗮𝘀: White AIO tube combs, RGB GPU cable, custom vinyl decals, 3D printed Brand of Sacrifice, Berserker Guts Pop Up Parade L figure.

• ───────────────────────── •

To guarantee your PC arrives in flawless condition, the interior components are locked down with custom molded instant expanding foam and anti static bubble wrap to prevent any movement. The exterior is then heavily bubble wrapped and nested inside a heavy duty double box system encased in rigid hard foam to absorb all shock during transit.

𝙄𝙛 𝙮𝙤𝙪 𝙬𝙤𝙪𝙡𝙙 𝙡𝙞𝙠𝙚 𝙖 𝙘𝙪𝙨𝙩𝙤𝙢 𝙗𝙪𝙞𝙡𝙙 𝙤𝙛 𝙮𝙤𝙪𝙧 𝙤𝙬𝙣 𝙛𝙚𝙚𝙡 𝙛𝙧𝙚𝙚 𝙩𝙤 𝙫𝙞𝙨𝙞𝙩 𝙤𝙪𝙧 𝙬𝙚𝙗𝙨𝙞𝙩𝙚 𝙖𝙣𝙙 𝙛𝙤𝙧 𝙖𝙣𝙮 𝙦𝙪𝙚𝙨𝙩𝙞𝙤𝙣 𝙙𝙤𝙣'𝙩 𝙗𝙚 𝙖𝙛𝙧𝙖𝙞𝙙 𝙩𝙤 𝙧𝙚𝙖𝙘𝙝 𝙤𝙪𝙩!