About this item 

PCIe Gen 5.0 Support for NV 40+ Series GPUs ATX 3.0 Support Full-bridge Resonant Converter Design Offer Highly Efficient and Low Noise Output Cost Effectively 16AWG PCIe Gen 5 12+4Pin (12VHPWR) Modular Cable HIGH EFFICIENCY UP To 90% At Typical Loading 120mm Fluid Dynamic Bearing Fan Optimized for Silence and Long Service Life. 18AWG Long Output Cables: 650mm for CPU & PCI-E 2.0. Complies with the Latest European Environmental Regulations. 6+2 Pin PCI-E 2.0 Connectors for Multi-GPU Support. 100% Japanese Capacitors , Ensure Tight DC Voltage Regulation and Extended Component Life.

PCIe Gen 5.0 Support for NV 40+ Series GPUs. (BGA850W, BGA750W) Please use the correct cable according to the requirements of the graphics card wattage, and must be correctly installed on the graphics card interface. The PCIe Gen 5 12+4Pin Modular Cable

The PCIe Gen 5 12+4Pin modular cable allows the power supply to support PCIe Gen 5 advanced graphics cards. This cable conforms with the UL specifications for 16AWG – UL 1007 cable standard offering excellent conductivity and heat resistance. The terminals of the connectors are made of a high-quality copper alloy, which can carry a current of up to 9.2A per pin with minimum resistance resulting in excellent conductivity.

Our connectors are adopting the 4 Spring design as suggested by Intel. According to Intel, the advantage of the 4 SRPING design is that it is more reliable, durable, and it can provide a more secure connection

The BitFenix BGA750W & BGA850W has passed all the PCIe Gen 5 standards. They support up to 2x power excursions for a duration of over 100µs guaranteeing stable power outputs for even the latest top tier graphic cards. The 12VHPWR connector is also tested for reliability and low resistance to offer peace of mind.

HIGH EFFICIENCY The 87+ high efficiency circuit brings both energy and money savings for the end user with the added benefits of 80% less heat output and stable power output. This translates to over 30% less power consumption in comparison to standard PSUs. *87+ ( 0% to 100% load)/ 90+ (40% to 70% load) 100-240V Full range design offer worldwide compatibility, and with high efficiency LLC, Active PFC, DC to DC circuits not only benefits you but also planet Earth with higher energy savings.

PSU Thermal Solution The compact design of the BGA750W and BGA850W is complemented by a high CFM, high speed 120mm Fluid Dynamic Bearing fan optimized for low fan-noise.A custom tuned fan curve allows these PSUs to operate at optimum levels throughout varying workloads. With only 32dBA at a speed of 2000rpm and only 18dBA at typical loads(60%), this low noise fan keep the components optimally cooled at 25°C even under full gaming loads without overheating.

Full-bridge Resonant Converter Design Offer Highly Efficient and Low Noise Output Cost Effectively Due to the unique design, the Full-Bridge Resonant Converters can optimally utilize even 100V input to efficiently output high power levels at very low voltage and current ripple. They can operate extremely efficiently in high load scenarios. This leads to a budget friendly, efficient, high power PSUs with high reliability and component life at the cost of slightly lower efficiency at low load levels.

Free Shipping

BitFenix BFG 850W PC Gaming PSU, 80 Plus Gold, Fully Modular Power Supply ATX3.0 & PCIE5.0 Ready

About this item

PCIe Gen 5.0 Support for NV 40+ Series GPUs
ATX 3.0 Support
Full-bridge Resonant Converter Design Offer Highly Efficient and Low Noise Output Cost Effectively
16AWG PCIe Gen 5 12+4Pin (12VHPWR) Modular Cable
HIGH EFFICIENCY UP To 90% At Typical Loading
120mm Fluid Dynamic Bearing Fan Optimized for Silence and Long Service Life.
18AWG Long Output Cables: 650mm for CPU & PCI-E 2.0.
Complies with the Latest European Environmental Regulations.
6+2 Pin PCI-E 2.0 Connectors for Multi-GPU Support.
100% Japanese Capacitors , Ensure Tight DC Voltage Regulation and Extended Component Life.

PCIe Gen 5.0 Support for NV 40+ Series GPUs. (BGA850W, BGA750W)
Please use the correct cable according to the requirements of the graphics card wattage, and must be correctly installed on the graphics card interface.
The PCIe Gen 5 12+4Pin Modular Cable

The PCIe Gen 5 12+4Pin modular cable allows the power supply to support PCIe Gen 5 advanced graphics cards. This cable conforms with the UL specifications for 16AWG – UL 1007 cable standard offering excellent conductivity and heat resistance. The terminals of the connectors are made of a high-quality copper alloy, which can carry a current of up to 9.2A per pin with minimum resistance resulting in excellent conductivity.

Our connectors are adopting the 4 Spring design as suggested by Intel. According to Intel, the advantage of the 4 SRPING design is that it is more reliable, durable, and it can provide a more secure connection

The BitFenix BGA750W & BGA850W has passed all the PCIe Gen 5 standards. They support up to 2x power excursions for a duration of over 100µs guaranteeing stable power outputs for even the latest top tier graphic cards. The 12VHPWR connector is also tested for reliability and low resistance to offer peace of mind.

HIGH EFFICIENCY
The 87+ high efficiency circuit brings both energy and money savings for the end user with the added benefits of 80% less heat output and stable power output. This translates to over 30% less power consumption in comparison to standard PSUs. *87+ ( 0% to 100% load)/ 90+ (40% to 70% load) 100-240V Full range design offer worldwide compatibility, and with high efficiency LLC, Active PFC, DC to DC circuits not only benefits you but also planet Earth with higher energy savings.

PSU Thermal Solution
The compact design of the BGA750W and BGA850W is complemented by a high CFM, high speed 120mm Fluid Dynamic Bearing fan optimized for low fan-noise.A custom tuned fan curve allows these PSUs to operate at optimum levels throughout varying workloads. With only 32dBA at a speed of 2000rpm and only 18dBA at typical loads(60%), this low noise fan keep the components optimally cooled at 25°C even under full gaming loads without overheating.

Full-bridge Resonant Converter Design Offer Highly Efficient and Low Noise Output Cost Effectively
Due to the unique design, the Full-Bridge Resonant Converters can optimally utilize even 100V input to efficiently output high power levels at very low voltage and current ripple. They can operate extremely efficiently in high load scenarios. This leads to a budget friendly, efficient, high power PSUs with high reliability and component life at the cost of slightly lower efficiency at low load levels.

BitFenix BFG 750W PC Gaming PSU, 80 Plus Gold, Fully Modular Power Supply ATX3.0 & PCIE5.0 Ready

Used for about a year and in excellent condition.

You will receive everything as shown in the pictures. Feel free to contact me for any other details.

Thanks!

Antec High Current Pro HCP 850W, 80 Plus Platinum Fully Modular Power Supply

REVOLUTION D.F. is a full modular power supply series with 80 PLUS® Gold
certified efficiency. In addition, REVOLUTION D.F. comes with an exclusive
D.F. switch design which offers users to activate the patented DFRTM (Dust
Free Rotation) technology anytime they desire. 100% Japanese 105°C
electrolytic capacitors ensure perfect durability. The built-in SAC(Smart Airflow Control) design guarantees a nearly silent operation within 70% system load. REVOLUTION D.F. is surely a perfect match for gaming systems or multimedia workstations.

**3 months manufacturer warranty is included**

**For product detail** [please click here](https://www.enermax.com/en/products/revolution-d.f.-750w)



Enermax Revolution D.F 750W 80+ Gold Full Modular Power Supply

REVOLUTION D.F. 2 is designed with 105°C rated Japanese electrolytic capacitors, 140mm compact chassis in-depth, semi-fanless mechanics, DC-to-DC conversion, the advanced LLC, Synchronous Rectifier (SR) design, and patented Dust-Free Rotation (DFR) technology.

The REVOLUTION D.F. 2 series is formally certified for ATX 3.0 compliance with performance improvements across all desktop segments. By using PCle 8 pin-12VHPWR Splitter cables included, you can be geared to the latest GPUs.

It can sustain up to 200% power load for power excursion and shorter power-on time to make you power up your system faster.

The semi-fanless mechanics enables the PSU fan to be static while the system load is under 20% to provide users with absolutes silence of 0 dB(A). Industrial-grade Dual Ball fan which effectively reduces unnecessary friction to optimize its performance. By incorporating these high-quality dual-ball bearings, the REVOLUTION D.F. 2 achieves enhanced stability and exceptional quality. This design not only extends the lifespan of the unit but also maximizes the performance of your system for your most demanding needs

With the arrival of PCIe 5.0, the ENERMAX 12VHPWR adaptor cable (*optional) can deliver up to 600W of power to the latest graphics cards. The cable is 600mm long and with dual 8-pin PCIe connectors for PSU side and 12VHPWR connector for GPU side. It replaces the bulky standard adapter solution of your graphics cards for easier cable management.

**3 months manufacturer warranty is included**

**For product detail** [please click here](https://www.enermax.com/en/products/revolutiondf2-1200)

Enermax Revolution D.F. 2 ATX 3.0 & PCIe 5.0 Ready 80+ Gold 1200W Full Modular Power Supply

REVOLUTION D.F. 2 is designed with 105°C rated Japanese electrolytic capacitors, 140mm compact chassis in-depth, semi-fanless mechanics, DC-to-DC conversion, the advanced LLC, Synchronous Rectifier (SR) design, and patented Dust-Free Rotation (DFR) technology.

The upgraded circuit design of the REVOLUTION D.F. 2 series allows its peak power wattage output to reach 200%, which means the 850W model of REVOLUTION D.F. 2 can stably provide 1700W for 100µs (microsecond) to support instantly power excursion.

The semi-fanless mechanics enables the PSU fan to be static while the system load is under 20% to provide users with absolutes silence of 0 dB(A). The quiet Fluid Dynamic Bearing (FDB) fan also ensures excellent cooling performance with minimized noise and vibration.

**3 months manufacturer warranty is included**

**For product detail** [please click here](https://www.enermax.com/en/products/revolutiondf2-1050)

Enermax Revolution D.F. 2 ATX 3.0 & PCIe 5.0 Compliant 80+ Gold 1050W Full Modular Power Supply

REVOLUTION D.F. 2 is designed with 105°C rated Japanese electrolytic capacitors, 140mm compact chassis in-depth, semi-fanless mechanics, DC-to-DC conversion, the advanced LLC, Synchronous Rectifier (SR) design, and patented Dust-Free Rotation (DFR) technology.

The upgraded circuit design of the REVOLUTION D.F. 2 series allows its peak power wattage output to reach 200%, which means the 850W model of REVOLUTION D.F. 2 can stably provide 1700W for 100µs (microsecond) to support instantly power excursion.

The semi-fanless mechanics enables the PSU fan to be static while the system load is under 20% to provide users with absolutes silence of 0 dB(A). The quiet Fluid Dynamic Bearing (FDB) fan also ensures excellent cooling performance with minimized noise and vibration.

**3 months manufacturer warranty is included**

**For product detail** [please click here](https://www.enermax.com/en/products/revolutiondf2-850)

BitFenix BFG 850W PC Gaming PSU, 80 Plus Gold, Fully Modular Power Supply ATX3.0 & PCIE5.0 Ready

Seller Reviews

Similar listings