This GPU was purchased about a year and a half ago from a miner and has been used for gaming up until a few months ago when I upgraded and has been sitting on my shelf ever since. It has passed every stress test and benchmark without issue and showed minimal signs of use when I got it. In case you are interested in this card for mining, it is one of the earlier rev. 1.0 models and does not have the LHR blocks. I've modded the card and included some info about the mods later in this post.

Included:
GPU
Original Packaging
Warranty Card
Quickstart Guide
IO Protectors
3x Spare Fans
Spare Fan Splitter

I lapped the heatsink and put on Thermal Grizzly KryoSheet and Upsiren 3D graphite pads and thermal putty, pretty much the best thermal compounds on the market. All of these products are rated for decades of usage, so this card should never need maintenance beyond a simple dedusting. My testing shows that the temps are well within the acceptable range during a Furmark test, reaching a steady state of 77C on the core and 101C hot spot with fan noise around the level of having the AC on in the background. I save all of my test results if you are interested.

The fans are very quiet so I would highly recommend setting an aggressive fan curve. I also recommend overriding the zero RPM mode. it has a tendency to not let the fans come on even when the temps rise, so it's better to just keep them running. At the minimum fan RPM (630 RPM/41%) the fans are inaudible. While not necessary, I've also found that this card benefits from a slight undervolt. I've included helpful links below.

Finally, I purchased a set of replacement fans a while back because I suspected one of them was dying. Turns out it was just the finicky zero RPM mode I mentioned earlier, but I've included them just in case you ever need them. They appear to be used, but functional OEM parts.

https://www.youtube.com/watch?v=GPs7Uufvoyw
https://www.youtube.com/watch?v=uDPKVKBMQU8&t=239s
https://github.com/rem0o/fancontrol.releases

Sorry for the info dump. Please let me know if you have any questions, I'm always happy to help!

GIGABYTE GeForce RTX 3070 GAMING OC 8G (rev. 1.0)

This memory was purchased in November 2021 and has been used in a gaming computer until now. It was paired with a Ryzen 5 3600 and a Ryzen 7 5700X with no issues and passed every benchmark and stress test I threw at it. Both of the case badges are unused.

Please feel free to contact me if you have any questions. I'm happy to help!

G.SKILL TridentZ RGB 32GB (4x8GB) 3600MHz CL19

This power supply was purchased in November 2020 and has been used in a gaming rig from then until now. From February 2022 till now it was plugged into a UPS. The most power it ever pulled continuously was 424 W during a simultaneous Cinnabench and Furmark burn-in test. Under normal gaming, it pulled about 320 W and I always ran it in hybrid fan mode (fan only kicks on above 50% load). I always shut off the computer while not in use. The warranty is still valid and everything is in near original condition. I already entered the registration sweepstakes.

Included is:
- All original documentation and packaging
- PSU
- Protective bag
- 1x 24-pin motherboard cable
- 2x 4+4-pin EPS cables
- 4x 6+2-pin PCI-e cables
- 2x 4-head SATA power cables
- 1x 2-head SATA power cable
- 1x 3-head MOLEX cable
- 1x 2-head MOLEX cable
- 1x MOLEX to 2-head SATA power adapter
- 1x AC power cable
- Power jumper (for running as a secondary PSU)
- 4x Seasonic branded cable ties
- Several twist ties 
- Seasonic case badge (pulled off of case, but still sticky)
- Set of EZDIY black and grey cable extensions with:
   - 1x 24-pin motherboard extension
   - 1x 4+4-pin EPS extension (one broken clip)
   - 2x 6-pin PCI-e extensions
   - 2x 8-pin PCI-e extensions
   - 4x 24-pin cable combs
   - 14x 8-pin cable combs
   - 8x 6-pin cable combs

See the Seasonic website (https://seasonic.com/prime-tx) for details about the features and specs.

Please feel free to reach out to me with any questions. I'm happy to help!