Used HyperX Pulsefire Haste 2 Wired White Mouse

PC Peripherals Budget Custom Bundle (Read Description For More Info)

Okay, so this is a Keychron V3 QMK Custom Mechanical Keyboard that I built myself. It has linear K Pro Silver switches. double shot OSA PBT keycaps, some lube, painter's tape, band-aids, medical tape, packaging foam, and the barebones kit with a knob along with other accessories. If you're aware of my other Keychron keyboard that is unopened and have red switches, go look that up for more context. Anyways, after fully building and modding this keyboard, I'm honestly not satisfied with the results. Most of it is fine, everything was working properly and sounds good most of the time. However, I think I overdid it with the lubing on both stabilizers of the space bar and backspace. No matter how hard I try to fix it, they don't sound good as the rest of the keys and other stabilizers. Since it's driving me crazy and I decided to just get prebuilt keyboards from now on with higher standards, I've decided to sell this since I got enough keyboards for now. The barebones kit already comes with a USB-C cable, a USB-A adapter, a screwdriver, a hex wrench, a keycap puller, and a switch puller. On the other hand, I added 2 layers of painter's tape underneath the PCB and a layer of cut out packaging foam between the tape layers and the silicon dampening layer. Even more, I put band-aid strips underneath the stabilizers to prevent wobble and medical tape underneath the long keycaps to make them less hollow. It also comes with a bag of extra keycaps and a few switches that are leftover from the build. If you want to change some things yourself and try to do a better job of making the keyboard sound and feel better, go right ahead.

Links Below -

Barebones Knob Keyboard Kit: https://www.keychron.com/products/keychron-v3-qmk-custom-mechanical-keyboard?variant=40256628850777

OSA PBT Keycaps: https://www.keychron.com/products/double-shot-pbt-osa-full-set-keycap-set?variant=40561987387481

Keychron K Pro Silver Switches: https://www.keychron.com/products/keychron-k-pro-switch?variant=40481265877081

G-Lube: https://www.gloriousgaming.com/products/glorious-lube-g-lube?variant=31797241544762

Painter's Tape + Packaging Foam Mod (Both Underneath PCB)

Band-Aid Mod (Underneath Stabilizers) + Hollow Mod (Put Medical Tape Underneath Long Keycaps)

Keychron V3 QMK Custom Mechanical Keyboard (Linear K Pro Silver Switches, Custom Built, With Knob)

Gateron Switch Opener (Silver)

Yeah, so I originally bought this to open up some keyboard switches to lube and film them bit by bit. However, what I didn't realize is that the process is way more tedious than I imagined. Since I'm not that patient go through it, I only gonna lube the stems from from now on or buy some that are already factory lubed. So I'm gonna sell this since I'm not planning on using it again and I only barely use it on a couple of switches. It's opened right out of the box and I'll ship it inside its original container.

Gateron Switch Opener (Silver)

This the Keychron V3 QMK Custom Mechanical Keyboard, which has its own linear K Pro Red switches and is fully assembled right out of the box without the knob. I ordered it on the original website along with some new keycaps. However, I decided to go with a more DIY approach and made another order with a barebones kit with a knob, different switches, and a switch opener so I can personally lube those switches myself. It's already too late to cancel the 1st order and I don't want it anymore since I already got another working mechanical keyboard. The other one has tactile switches and my future DIY one with have speedy linear switches. Those two keyboards are enough for me and I want some of my money back. I bought this keyboard from the original website, not from Amazon. Since the Keychron returning and refunding processes are way more tedious, I decided to resell it on Jawa since it's simpler for me to do and it'll cost me nothing. This is the best price I could offer at the moment and I already checked how much it would cost on the original Keychron and Amazon websites with shipping and taxes accounted for. Luckily, I never opened up the keyboard, so it's brand new inside the box.

Keychron Link:
https://www.keychron.com/products/keychron-v3-qmk-custom-mechanical-keyboard

Keychron V3 QMK Custom Mechanical Keyboard (Linear K Pro Red Switches, Fully Assembled)

Yeah, so these are coiled cables that I got from HyperX where I used them to connect to my HyperX keyboards. I mainly got them for aesthetics but they are kind of impractical for my current setup. I had two different keyboards with a right USB-C port on one and a left USB-C port on the other. So yeah, kind of inconvenient for me whenever I want to switch up my keyboards. I preferred using the regular braided cables that came with the keyboards which are way more practical. The coiled cables work perfectly out of the box but I have no need for them. As I want to have less space, I'm selling these at a cheaper price than normally on retail. Just message me on which color you want if you bought one either before or after. 1st come 1st serves whoever bought and picked that color 1st, leaving the other color for grabs. I'll update this page when one is bought and buyers would know which color is left. Also, they don't come with their original boxes, I already packed them in bubble wrap mailers to save money.

HyperX Website Link:
https://hyperx.com/products/hyperx-coiled-cable-keyboard-cables

HyperX Coiled Cable Blue or Gray (Message Me Which Color You Want)

Got this mouse about a couple months ago as a replacement. Great mouse from a great brand, but the scroll wheel is inconsistent sometimes. Whenever I scroll up, the page gets a little jumpy but that happens on some occasions. I don't know whether it's very sensitive or it's just the decoder. Other than that, there's no other problems with this mouse. It's up to date with the latest firmware and the grip tape is already attached with a spare set of skates.

Here's the website link for more info about this mouse:

https://hyperx.com/products/hyperx-pulsefire-haste-2-gaming-mouse?variant=43416224071837

(Sorry for the poor image quality)

HyperX PulseFire Haste 2 White Wired Gaming Mouse

Alright, so I modded this replacement HyperX 65% keyboard I got from customer support. It worked fine out of the box and I decided to do a little fixing to make a better typing experience. I added 3 layers of painter's tape in the back of the PCB with holes cut out to fit in the holes and ports. I also added some medical tape inside several of these keycaps to dampen the sound and some underneath the stabilizers to prevent less rattle. I also lubed both the mechanical switches and stabilizers too for the same effects. These made some improvements to the typing feel and sound everywhere, except for the left shift key. It doesn't feel or sound as good as the other keys, but it's still functional. As I was trying to tune it, I accidentally pop off the left side stabilizer of the shift key. I tried looking up tutorials on how to put it back on a soldered keyboard, but there's no way to fix that mistake at that level. The last picture regardless of the low image quality include the extra red keycaps, a keycap puller, and the left stabilizer parts in that small bag over there. Still the left stabilizer is the only thing broken, everything else still works and I can still type on it pretty well despite the mishap with the left shift key. I already tested it out and ironically it sounds/feels better without that left stabilizer. I'm sending this keyboard out for cheap in a bubble wrap mailer. It doesn't include the original box it came in, but it does still include the USB-C cable, the stabilizer in a bag, the extra keycaps, the keycap puller, and the keyboard itself.

HyperX Website Link:
https://hyperx.com/collections/gaming-keyboards/products/hyperx-alloy-origins-65

HyperX 65% Mechanical Keyboard W/ Linear Red Switches (Left Shift Stabilizer Popped Off)

This controller has been with me for at least 2 years now. It's in good working condition despite the scratches or other signs of wear. I'm mainly used it to play PC games and sometimes on my Xbox. I've added Lizard Skin grip tape to the glossy D-Pad, shoulder buttons, and triggers to make things less loose. I barely used to the back programmable buttons and opted to play games without it. I checked and you can still remap buttons while the paddles don't try to come off. I've updated the firmware with the PowerA Gamer HQ App. I recommend downloading this app on your PC and/or Xbox if you want to stay up to date. Recently, everything works as there's surprisingly still no stick drift and every button works while still feeling satisfying to press. I'm not including the box and stickers it originally came with since I thrown that away a long time ago and even if I did, it won't fit with any of the boxes I've saved for packaging. I still kept the manual though along with the braided USB-C cable, face plates, extra thumbsticks, and that back cover if you're not using the back paddles. The anti-friction rings on the white matte face place are a little loose so I recommended the black rubberized one since the rings on it are still tight. Otherwise, everything is in working condition if you're looking for a wired pro controller at a reduced price. The reason why I'm selling this is because I bought a new controller with Hall Effect features and I've been mostly using that ever since while barely using the Fusion Pro. The latter still works as I've tested recently but it's mostly just there on display.

Here's a link if you want more info:

https://www.powera.com/p/fusion/controllers/wired/fusion-pro-2-wired-controller-for-xbox-series-xs-1516954-01/

The remarkable FUSION Pro 2 Wired Controller for Xbox Series X|S puts premium materials and pro-level gaming features at your fingertips. Includes a headset jack, volume dial with mic mute, and a braided 10ft. (3m) USB-C cable with inline release.

Mappable Pro Pack with customizable paddles
Swappable faceplates and thumbsticks
Three-way trigger locks
Dual rumble motors and magnetic impulse triggers
3.5mm headset jack

PowerA Fusion Pro 2 Wired Xbox Controller

Got this mouse about a couple months ago. Great mouse from a great brand, but the scroll wheel is inconsistent sometimes. Whenever I scroll up, the page gets a little jumpy but that happens on some occasions. Other than that, there's no other problems with this mouse. It's up to date with the latest firmware and the grip tape is already attached.

Here's the website link for more info about this mouse:

https://hyperx.com/products/hyperx-pulsefire-haste-2-gaming-mouse?variant=43416224071837

(Sorry for the poor image quality)

PC Peripherals Budget Custom Bundle (Read Description For More Info).

This is a bunch of old PC peripherals that I used during my early college days, but since I upgraded to more quality hardware, I have no further use for them. Thus, I decided to sell them for someone who wants some PC peripherals at a reasonable price and rest assured, I already tested them and are working fine. Here below are the list of items included in this budget custom bundle (I can't put in the links for most of them so type their product names in the search bar):

Q5 Slim Rechargeable Wireless Mouse

NPET K10 Gaming Keyboard

Pictek Wired Gaming Mouse

Jounivo USB Microphone

Sylvania Water Resistant Bluetooth Speakers

VicTsing Gaming Mouse Pad

3.5 mm Audio Cable Jack + 2 Small Micro USB A Cables

Blue Yeti USB Microphone - Blackout w/ Mudder Foam Cover & Auphonix Pop Filter.

This is a Blue Yeti I bought in early 2021 where I mostly used it to record lines and chat with friends on Discord whenever I play online games with them. It still works and is in a currently good condition as I have used it recently as well as frequently this past year in 2022. However, I decided to upgrade to a more premium mic so I decided to sell my Blue Yeti since I won't be using it often once my new mic arrived. I cannot ship you the old box the old mic arrived since it was in bad condition but both the pamphlets and wire connector have been preserved in pristine condition. I would also throw in the Mudder Foam Cover as it is attached to the mic and an Auphonix Pop Filter that can be adjusted to your liking. They're also in good condition and since they aren't compatible with my newer mic, I'm throwing them into this custom Blue Yeti mic bundle.

WELCOME!